Swash plate type axial piston pump generally used to rotate the cylinder, end assignment form. End surface of the cylinder by a double set with a metal plate and steel valve plate consisting of friction, and most are methods using plane assignment, so maintenance is more convenient. Oil pan is one of the key components of an axial piston pump, hydraulic pump work distribution, high-pressure oil on the one hand the working chamber of the hydraulic cylinder to the oil pan, on the other hand with the oil pan and cylinder block between The film pressure form of a hydraulic cylinder so that the cylinder away from the thrust reverser with the oil pan. Cylinder oil pan design of hydraulic compression force Fn slightly larger than the valve plate to the cylinder thrust reverser hydraulic pump sales Ff that Fn / Ff = 1.05 ~ 1.1 hydraulic pump repair, the pump is working properly and maintain a high The volumetric efficiency. When the bit is not zero fold variable displacement hydraulic axial piston pump type swash plate angle is zero is called the median, then the output of the pump flow rate should be zero. But sometimes deviate from the adjustment mechanism in place midpoint of the phenomenon, there is still a flow rate output at the midpoint. The reason is that the position controller deviation, loose or damaged, you need to re-zero, tighten or replace. Pump is not enough to maintain the angle of the tilt angle of the trunnion wear also have this phenomenon. Distribution _ _ hydraulic pump hydraulic preferred by the Jinan Jing Jing Chong Chong Hydraulic Machinery Limited. Jinan Jing Chong Hydraulic Machinery Co., Ltd. (www.jnjcyy.com) (www.jnjcyy.com) strong, credible, in Jinan, Shandong mining machinery industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead crystal create hydraulic and you hand into the brilliant, for a better future!